If your ESX servers are not connected to network storage or if you do not have enough available space on your SAN to dedicate a sub folder of a VMFS volume for ISO files, then you can use a NFS network share to centrally store these images. Creating the NFS share can be done with many server operating systems, but did you know that Windows Server 2003 R2 has native NFS?
VMware-land.com has many “how to” VMware Tips for ESX, and the following is the instructions found there for creating a Windows 2003 R2 NFS share:
On the Windows 2003 Server make sure “Microsoft Services for NFS” in installed. If not you need to add it under Add/Remove Programs, WindowsComponents, Other Network File and Print Services
Next go to folder you want to share and right-click on it and select Properties
Click on the NFS Sharing tab and select “Share this Folder”
Enter a Share Name, check “Anonymous Access” and make sure the UID and GID are both -2
In VirtualCenter, select your ESX server and click the “Configuration” tab and then select “Storage”
Click on “Add Storage” and select “Network File System” as the storage type
Enter the Windows Server name, the folder (share) name and a descriptive Datastore Name
Once it finishes the configuration you can now map your VM’s CD-ROM devices to this new VMFS volume
Repeat steps 5 through 8 for each of your ESX servers to make the same ISO files available to all ESX hosts.
These instructions assume that you have already configured the VMkernel port group on a vSwitch for each ESX host. For instructions and information about configuring the VMKernel for NAS/NFS storage check the Storage Chapter of the ESX Server 3 Configuration Guide.
Of course, you can use the NFS share for more than just ISO file storage too. This is a good repository for patches and scripts that need to be used on all hosts. NFS also makes a good target for VM image backups too. Use some imagination and install the free VMware server on your 2003 R2 box and you have a low budget DR platform. Oh yeah, I shouldn’t forget to mention you can even run ESX VMs from NFS!
ESX version 3.x only supports NFS version 3 over TCP/IP.
Best practice for TCP/IP storage is to use a dedicated subnet. This will usually require creating separate Service Console and VMKernel port groups on a dedicated vSwitch.
On the Windows 2003 R2 server be sure to configure the shared folder so that the both the share and the file permissions allow everyone and anonymous full control. You can make the share read only when adding the storage in ESX.
Be sure to remember to punch a hole in the ESX firewall for NFS. On the Configuration tab, go to the Security Profile settings and add the NFS Client so it appears in the allowed outbound connections.
Dont forget the thing about windows 2003 security thing"On the Windows 2003 R2 server be sure to configure the shared folder so that the both the share and the file permissions allow everyone and anonymous full control. You can make the share read only when adding the storage in ESX." Then u will not be see this error:Error during the configuration of the host: Cannot open volume: /vmfs/volumes/********-********It took me avile to check that, and now i will spank myself around.